GE IS200EPSMG1AED EX2100 励磁控制励磁机

产品描述
励磁电源型号为IS200EPSMG1A，安装在EPBP背板上，为其他控制器提供逻辑电平电源。EPSM型号的供电方式为:EPDM输出125 VDC的电源，EPSM接收到电源后，将电压输出为5vdc、15vdc或24vdc。M1、M2和C控制器的电源位于控制柜中控制机架下方的电源模块中。

EPSM模块的电源也会被发送到外部模块。24 VDC供电给crowbar模块、EDCF、EGDM和EDEX去磁模块。ECTB和EXTB模块使用隔离的70 VDC，用于接触润湿。由于IS200EPSMG1A模块为A版本，该板不支持向后兼容。

IS200EPSMG1A板使用的产品专用手册是GEI-100462。该系列手册是GEH-6632，有关EPSM板的信息可以在第53页找到。

有关其他版本之间的兼容性，请联系AX Control或制造商。这板，虽然已停产，继续可通过AX控制。维修这个励磁器电源模块也是一种选择。有任何问题请联系我们。

Product Description
Excitation Power Supply Model number IS200EPSMG1A is mounted in the EPBP backplane and provides logic level power to other controllers. In terms of power for the EPSM models, a power supply of 125 VDC is sent from the EPDM, after the power supply has been received the EPSM will generate the voltages into 5 VDC, 15 VDC, or 24 VDC. The power supplies for the M1, M2, and C controllers are located in the power supply module which is located underneath the control rack in the control cabinet. 

Power from the EPSM module is also sent to external modules. The twenty-four VDC power is supplied to the crowbar module, EDCF, EGDM, and EDEX de-excitation module. An isolated seventy VDC that is used for contact wetting is used for the ECTB and EXTB modules. As the IS200EPSMG1A module is an A version, this board is not backward compatible. 

The product-specific manual that is used with the IS200EPSMG1A board is GEI-100462. The series manual is the GEH-6632 and information about the EPSM board can be found on page fifty-three.

For compatibility between the other revisions, please reach out to AX Control or the manufacturer. This board, although discontinued, continues to be available through AX Control. Repair for this Exciter Power Supply Module is also an option. Please reach out with any questions.
 

IS200EPSMG1AED控制系统操作界面简介，操作员通过简单的鼠标键盘操作,就可以监视生产装置乃至整个I厂的生产运行情况，并根据生产要求
调节运行数据。强大的可组态功能，简化使用，节省大量时间。不论是简单的单回路控制，还是更复杂的控制回路，DCS都能为用户提供支持。同时提供用户自主开发专用控制算法的支持能力。能够对现场多达3- 10万个位号进行转换、收集，通过处理器运算，实时显示、存储、控制。IS200EPSMG1AED控制系统采用了标准化、模块化的设计，可提供多层的开放数据接口。