IC697CPX928 中央处理器GE Fanuc系列90-70模块目录号为IC697CPX928，是一款中央处理器，主要用于执行下载到CPU内存中的用户程序。该CPU模块是一个单槽机箱，具有80486DX4微处理器，速度为96 MHz，每次布尔函数执行0.4µs。该模块配备了6MB电池备份RAM的板载内存和256KB非易失用户闪存，其中还存储了CPU固件。
IC697CPX928能够处理任何组合的大12K输入和输出，以及高达8K的模拟输入和输出。它支持32位浮点数据。
IC697CPX928通过编程软件进行配置。它没有跳线端子或拨码开关用于硬件参数设置。应用软件由MS-DOS软件产品或基于Windows的软件产品通过以太网TCP/IP或通过SNP端口运行在Windows 95或Windows NT上。
该控制器专门配备了七(7)个状态led，一个锂电池用于保留随机存取存储器(RAM)的内容，以及一个(1)RS232串口，两个(2)RS485串口和一个(1)Factory Reset端口等通信端口。
IC697CPX928兼容各种可选模块，以增强和提供额外的CPU功能。这些可选模块包括以太网接口模块，可编程协处理器，字母数字协处理器，总线控制器，通信模块，I/O链路接口，以及整个IC697离散和模拟I/O模块家族。
IC697CPX928模块所需的标称电流为3.1安培。输入电压要求为直流5v。强制空气冷却额定功率为70 CFM，该模块可以在32至140华氏度的环境温度下运行。
在不强制风冷的情况下，IC697CPX928 CPU模块的工作温度范围可以降低到32 ~ 122华氏度。根据电源类型的不同，IC697CPX928支持安装120伏交流电源、240伏交流电源和24伏直流电源的机架风扇模块。CPU模块带有3个串口，其中2个端口支持RS-485通信，1个端口支持RS-232通信。这些串行端口可用于与编程设备进行CPU配置接口。此外，还可以在PLC中安装可选的以太网模块，使IC697CPX928模块能够通过以太网进行配置。IC697CPX928模块支持的I/O多包括8000个模拟I/O和任何混合的12,000个I/O。IC697CPX928模块需要GE Fanuc系列90-70 PLC机架上的1个插槽进行安装。模块正面共有7个led，用于状态更新。
The GE Fanuc Series 90-70 module with catalog number IC697CPX928 is a Central Processing Unit (CPU) that is used mainly to execute user program downloaded to the CPU’s memory. This CPU module is a single slot chassis that features an 80486DX4 microprocessor with speed of 96 MHz and 0.4 µs per Boolean function execution. This module is equipped with an on-board memory of 6MB battery-backed up RAM and 256KB non-volatile user flash memory where CPU firmware is also stored.
The IC697CPX928 is capable of handling a maximum of 12K inputs and outputs of any combination, and up to 8K analog Input and Output. It supports 32-bit floating point data.
The IC697CPX928 is configured using the programming software. It has no jumper terminals or DIP switches for hardware parameter setting. Application software are Programmed by MS-DOS software products, or Windows based software products running on Windows 95 or Windows NT over Ethernet TCP/IP or through an SNP port.
This controller has is equipped with Seven (7) status LEDs specifically, a lithium battery that is used to retain the contents of the Random Access Memory (RAM), and communication ports such as One (1) RS232 serial port, Two (2) RS485 Serial port and One (1) Factory Reset port.
The IC697CPX928 is compatible for use with a variety of option modules to enhance and provide additional capabilities to the CPU. These option modules include Ethernet Interface modules, Programmable Coprocessor, Alphanumeric Coprocessor, Bus Controller, Communication modules, I/O Link Interface, and the entire IC697 discrete and analog I/O modules family.
The nominal current required by the IC697CPX928 module is 3.1 Amps. The input voltage required is 5 Volts DC. With forced air-cooling rated at 70 CFM, the module can be operated at ambient temperatures between 32 and 140 degrees Fahrenheit.
Without forced air-cooling, the range of operating temperatures of the IC697CPX928 CPU module is reduced to between 32 and 122 degrees Fahrenheit. Depending on the types of power supply that are available, 120 Volts AC, 240 Volts AC, or 24 Volts DC-powered rack fan assemblies can be installed on the IC697CPX928 module. The CPU module comes with 3 serial ports, of which 2 ports support RS-485 communication and 1 port supports RS-232 communication. These serial ports can be used to interface with programming devices for CPU configuration. Additionally, optional Ethernet modules can also be installed in the PLC to enable the configuration of the IC697CPX928 module over Ethernet networks. The I/O supported by the IC697CPX928 module include a maximum of 8000 analog I/O and 12,000 I/O in any mix. The IC697CPX928 module requires 1 slot in GE Fanuc Series 90-70 PLC rack for installation. A total of 7 LEDs are provided on the front of module for status updates.
该控制器专门配备了七 （7） 个状态 LED、用于保留随机存取存储器 （RAM） 内容的锂电池和通信端口，例如一 （1） 个 RS232 串行端口、两 （2） 个 RS485 串行端口和一 （1） 个出厂重置端口。
IC697CPX928 兼容各种选件模块，以增强 CPU 并提供额外的功能。这些选件模块包括以太网接口模块、可编程协处理器、字母数字协处理器、总线控制器、通信模块、I/O 链路接口以及整个 IC697 分立和模拟 I/O 模块系列。
厦门雄霸专注于欧美进口备件DCS/PLC/机器人/伺服
官网链接：www.xiongbagk.cn
备件咨询#18059884797 何经理
公司主营品牌包括：ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX?、本特利BENTLY、艾默生EMERSON?、横河、NI、A-B罗克韦尔、霍尼韦尔HONEYWELL?、伍德沃德WOODWARD、MOTOROLA、XYVOM、力士乐REXROTH、KUKA、DEIF、瑞恩RELIANCE、施耐德SCHNEIDER?、安川、?穆格MOOG、PROSOFT...
扫一扫咨询微信客服
