5466-318 三重模块化冗余内核电源模块
5466-318模块由伍德沃德公司为MicroNet数字控制系列设计，设计为三重模块化冗余（TMR）内核电源（PS）模块。安装此模块后，它将作为三个内核电源之一用于在MicroNet TMR系统上运行的应用程序。安装后，此模块将插入内核部分的个插槽中。请注意，在移除此类模块之前，必须移除 MicroNet TMR 内核电源中的所有模块。
5466-318模块的物理构成是金属的，模块的前面板上只有一个LED。模块面板上的 LED 用于指示设备的电源运行状况。该模块将在来自MicroNet主电源的10伏直流电电源上运行。从主MicroNet电源接收电源后，它将在内核部分的其余部分将其调节为5 A或<> VDC。
安装 5466-318 后，它可以用于许多不同的部分，这些部分如下，非危险位置、I 类、组 A-B-C-D 和分区 2 位置。如果模块安装在非上述位置，则在操作过程中可能会发生潜在错误。
MicroNet 数字控制系列中的许多型号被认为是过时的，因为伍德沃德不再生产并且没有广泛使用，5466-318 型号不是这些型号之一，因为它仍然可以广泛使用。
The physical composition of the 5466-318 module is metal, with only one LED on the front panel of the module. The LED on the module panel is used to indicate the power operation status of the device. This module will operate on a 10 volt DC power supply from the MicroNet main power supply. After receiving power from the main MicroNet power supply, it will adjust it to 5 A or<>VDC in the remaining parts of the kernel.
After installing 5466-318, it can be used in many different parts, such as non hazardous locations, Class I, Group A-B-C-D, and Zone 2 locations. If the module is installed in a location other than the above, potential errors may occur during operation.
Many models in the MicroNet digital control series are considered outdated as Woodward is no longer produced and not widely used, and the 5466-318 model is not one of these models as it can still be widely used.
扫一扫咨询微信客服
