5466-258模块是一个单工离散输入/输出单元。 该装置由伍德沃德生产,是MicroNet数字控制系列的一部分，也可用于Vertex- Pro机箱。该单元使用的典型硬件是MicroNet Plus硬件。该模块可用于单工和冗余系统。该模块可用于任何机箱模块，无论是八插槽还是十四插槽。请注意,该装置的位置必须是非危险的，或者在I级，2区，A. B、C和d组内。5466- 258模块是一个48/24分立组合模块， 这表示有48个输入和24个输出。有两种配置可以使用该模块。其中-个将由两个24/12离散ftm组成,它们将通过两条高密度离散/模拟电缆连接到该模块。在第二种配置中， 该模块上的离散输入将被光学隔离,河通过24/12 ftm进行访问。在前面板上,贿-个指示潜在故障的LED。模块上还有两个连接器。 The 5466-258 module is a simplex discrete input/output unit. This device is produced by Woodward and is part of the MicroNet digital control series, which can also be used in Vertex Pro chassis. The typical hardware used in this unit is MicroNet Plus hardware. This module can be used for both simplex and redundant systems. This module can be used for any chassis module, whether it is eight slots or fourteen slots. Please note that the location of the device must be non hazardous or in Class I, Zone 2, A B. Within groups C and d. The 5466-258 module is a 48/24 discrete combination module, which represents 48 inputs and 24 outputs. There are two configurations available to use this module. One of them will consist of two 24/12 discrete FTMs, which will be connected to the module through two high-density discrete/analog cables. In the second configuration, the discrete inputs on this module will be optically isolated and accessed through 24/12 ftm. On the front panel, there is an LED indicating a potential fault. There are also two connectors on the module.
扫一扫咨询微信客服
