FANUC A06B-6140-H055 电源模块 电缆连接器采用更新的架构

A06B-6140-H055 Alpha I 电源模块 AIPS -55 是 FANUC 制造的伺服放大器。凭借其时尚的设计，它旨在以节省空间的方式完美贴合，因为只有像这样的紧凑型装置才能做到。该电源体积小巧，安装空间节省多达 30%，散发的热量比大型型号少得多。电缆线的长度已缩短，这是节省空间和改善功能的另一项措施。电缆连接器采用更新的架构，可以更轻松地安装到控制板中，A06B-6140-H055 从而减少向连接框架的投影。此外，放大器只需要一根电缆即可连接。减少电缆的另一个功能是能够使用更少的外部电缆，因为不再需要它。这是由于包含从电机输出接线端子到法兰的接地连接。

电源线现在比以往任何时候都更简单，A06B-6140-H055 连接器连接到输入电源线，节省了连接时间。从伺服放大器柜上拆下也将花费更少的时间，因为输入电源线和电机电源线在快速接头上分离。现在，维护您的设备也具有改进的功能，A06B-6140-H055 包括以简单的方式更换风扇电机，大大减少了更换风扇电机通常所需的时间。更换伺服放大器所需的时间大大减少，因为连接器连接到输入电源线，连接器连接到电机电源线。不仅如此，现在更换伺服放大器后无需执行参考位置返回操作。伺服放大器上的Absolute Pulsecoder中有一个备用电容器，可实现近10分钟的位置检测操作，无需参考位置返回操作。伺服放大器的架构使其必须安装在功率磁性机柜中，A06B-6140-H055 其散热器从机柜背面伸出。这样，来自半导体的热量就会被适当地带走，您可以确保热量不会回流到您身上。伺服放大器有一个电容器，有助于平滑电源电路。请注意，当您关闭设备的电源时，它可能仍然有电一会儿。作为安全预防措施，请等待几秒钟让电放电，并且在您看到红色 LED 熄灭之前，A06B-6140-H055 任何时候都不要触摸它，这表明电量已消散。

A06B-6140-H055 Alpha I power module AIPS-55 is a servo amplifier manufactured by FANUC. With its fashionable design, it aims to perfectly fit in a space saving way, as only compact devices like this can achieve this. This power supply is compact, saves up to 30% of installation space, and emits much less heat than larger models. The length of the cable has been shortened, which is another measure to save space and improve functionality. The cable connector adopts an updated architecture, which makes it easier to install into the control board. A06B-6140-H055 reduces projection towards the connection frame. In addition, the amplifier only requires one cable to connect. Another function of reducing cables is the ability to use fewer external cables as they are no longer needed. This is because it includes a grounding connection from the motor output terminal to the flange.
The power cord is now simpler than ever before, with the A06B-6140-H055 connector connected to the input power cord, saving connection time. It will also take less time to remove from the servo amplifier cabinet, as the input power line and motor power line are separated at the quick connector. Now, maintaining your device also has improved features, A06B-6140-H055 includes replacing the fan motor in an extremely simple way, greatly reducing the time typically required to replace the fan motor. The time required to replace the servo amplifier is greatly reduced because the connector is connected to the input power line and the connector is connected to the motor power line. Moreover, there is no need to perform a reference position return operation after replacing the servo amplifier. There is a spare capacitor in the Absolute Pulsecoder on the servo amplifier, which can achieve position detection operation for nearly 10 minutes without the need for reference position return operation. The architecture of the servo amplifier requires it to be installed in the power magnetic cabinet, and the heat sink of A06B-6140-H055 extends from the back of the cabinet. In this way, the heat from the semiconductor will be appropriately carried away, and you can ensure that the heat will not reflux back onto you. The servo amplifier has a capacitor that helps smooth the power circuit. Please note that when you turn off the power of your device, it may still have power for a while. As a safety precaution, please wait for a few seconds for the battery to discharge, and do not touch A06B-6140-H055 at any time until you see the red LED turn off, as this indicates that the battery has dissipated.

控制处理机 FCP270、 ZCP270

I/A 系统输入输出组件的种类

FBM201 8通道0-20MA输入接口组件 8AI

FBM201b 8通道0-100MV输入接口组件 8AI

FBM201c 8通道0-5VDC输入接口组件 8AI

FBM201d 8通道0-10VDC输入接口组件 8AI

FBM202 8通道热电偶/毫伏输入接口组件 8T/C

FBM203 8通道热热电阻输入接口组件(Platinum) 8RTD

FBM203b 8通道热热电阻输入接口组件(Nickel) 8RTD

FBM203c 8通道热热电阻输入接口组件(Copper) 8RTD

FBM204 8通道0-20MA输入接口组件 4AI/4AO

FBM206 8通道脉冲输入接口组件 8PI

FBM207 16通道电压监视输入接口组件 16DI

FBM207b 16通道24VDC触点输入接口组件 16DI

FBM207c 16通道48VDC触点输入接口组件 16DI

FBM208 输出回读冗余8通道0-20MA输入/输出接口组件 冗余4AI/4AO

FBM211 16通道0-20MA输入接口组件 16AI

FBM212 14通道热电偶输入接口组件 14T/C

FBM214 8通道HART通讯输入接口组件 8HART输入

FBM215 8通道HART通讯输出接口组件 8HART输出

FBM216 冗余8通道0-20MA/HART通讯输入接口组件 冗余8AI/HART输入