IC698CRE040是GE发那科/艾默生自动化中央处理单元(CPU)。该CPU支持高可用配置和冗余配置。该模块是PAC system RX7i可编程自动化控制器(PAC)平台的一部分。该CPU单元具有相对较高的随机存取内存(RAM)和非易失性内存分配，两者均为64MB。此外，它配备了一个高速微处理器，时钟速度为1.8 GHz，扫描速率为0.024ms / 1000布尔触点/线圈。
IC698CRE040提供2个支持RS232和RS485通信标准的串行通信接口和2个支持以太网连接的RJ45接口，支持10/ 100mbps的半双工/全双工传输速率，具有自感知能力。该CPU还提供一个(1)站管理器端口。串口支持的协议有Modbus RTU Slave、SNP、serial I/O。
此外，内置的以太网接口能够使用以太网全局数据(EGD)进行数据交换，使用SRTP进行TCP/IP通信服务，支持SRTP通道，Modbus/TCP服务器和Modbus/TCP客户端，完整的编程和配置服务，在以太网网络上同步到SNTP时间服务器(当与5.00或更高版本的CPU模块一起使用时)。以太网端口多支持16个web服务器和FTP连接。
该CPU支持梯形图、C语言、结构化文本和功能框图等编程语言。该CPU多可下载512个Block，每个Block的大大小为128KB。
IC698CRE040可通过Proficy Machine Edition应用软件或Logic Developer编程软件进行配置。
GE Fanuc IC698CRE040是一款支持以太网端口的CPU，兼容Rx7i pac系统。CPU的处理速度为1.8 GHz，内存为64 MB，额定直流电压为+5伏，额定电流为6.8安培。它支持浮点数据和快速运算。CPU模块设计有3个串口，支持MODBUS RTU从站、SNP、串口I/O等多种串口协议。IC698CRE040 CPU采用RS-232、以太网和RS-485接口进行嵌入式通信。CPU可以使用Proficy Machine Edition或Logic Developer编程软件进行编程。它可以处理机器控制和物料搬运应用。它使用VME 64标准格式与I/O模块和其他模块进行通信。为了连接其他人机接口设备和编程单元，它可以使用以太网端口或串行端口。
GE发那科IC698CRE040 CPU采用奔腾M微处理器，具备备用冗余功能。IC698CRE040 CPU可以通过16个web服务器和其他FTP连接进行数据监控。中央处理器带有内置时钟，由电池备份。IC698CRE040可以通过RS 232和485接口升级到新的固件版本。CPU可以检测低电量情况，并提醒操作员不同的事件。CPU采用开放式外壳，建议安装在干燥、无空气污染的环境中。
The IC698CRE040 is a GE Fanuc / Emerson Automation Central Processing Unit (CPU). This CPU supports configuration of high-availability or redundancy configuration. This module is part of the PACSystem RX7i Programmable Automation Controller (PAC) platform. This CPU unit features a relatively high allocation Random Access Memory(RAM) and non-volatile memory, both amounting to 64MB each. Additionally, it is equipped with a high-speed microprocessor with clock speed of 1.8 GHz and scan rate of 0.024ms per 1000 Boolean contacts/coils.
The IC698CRE040 is provided with embedded communication port such as Two (2) Serial communication ports supporting RS232 and RS485 communication standard and Two (2) RJ45 ports for Ethernet connectivity, supporting transmission rate of 10/100 Mbps half/full duplex with auto-sensing capability. This CPU is also provided with One (1) station manager port. The protocols supported by the serial ports are Modbus RTU Slave, SNP, Serial I/O.
In addition, the built-in Ethernet interfaces is capable of Data exchange using Ethernet Global Data (EGD), TCP/IP communication services using SRTP, Support for SRTP Channels, Modbus/TCP Server and Modbus/TCP Client, Full programming and configuration services, Time synchronization to SNTP timeserver on Ethernet network (when used with Release 5.00 or later CPU module). Up to 16 web server and FTP connections is supported by the Ethernet ports.
This CPU supports programing languages such as Ladder Diagram, C, Structured Text and Function Block Diagram. This CPU may be downloaded up to 512 Block with each block having a maximum size of 128KB.
The IC698CRE040 is configured using the Proficy Machine Edition application software or the Logic Developer programming software.
The GE Fanuc IC698CRE040 CPU is an Ethernet port-enabled CPU that is compatible with the Rx7i PACsystem. The CPU comes with a processing speed of 1.8 GHz and it has a memory of 64 MB. It operates with a voltage rating of +5 Volts DC and current rating of 6.8 Amps. It supports floating point data and fast operation. The CPU module is designed with 3 serial ports and it is compatible with different serial protocols, including the MODBUS RTU slave, SNP, and serial I/O protocols. For embedded communication, the IC698CRE040 CPU uses the RS-232, Ethernet, and the RS-485 interface. The CPU can be programmed using Proficy Machine Edition or Logic Developer programming software. It can handle machine control and material handling applications. It uses the VME 64 standard format for communicating with the I/O module and other modules. To connect other human-machine interface devices and programmer units, it can use the Ethernet ports or a serial port.
The GE Fanuc IC698CRE040 CPU is installed with a Pentium M microprocessor with stand-by redundancy. The IC698CRE040 CPU can be used for monitoring data by using 16 web-servers and other FTP connections. The CPU comes with a built-in clock that is backed up with a battery. The IC698CRE040 CPU can be upgraded to the latest firmware version by using the RS 232 and 485 port. The CPU can detect low battery situations and alerts operator for different events. The CPU module has an open enclosure and requires to be installed in dry and free from airborne contaminants.
其他相关型号：GE VMIVME-7750
GE IS420UCSBH1A
GE IS220PPDAH1B
GE VMIVME-2540-000
GE IS215UCVEM06A
GE VMIVME-7807
GE IS215UCVEH2AE
GE IC697CPX928
GE DS200SIOBH1ACA
GE IS215UCVEH2AB
GE IS200TREGH1BEC
GE DS200SIOBH1ABA
通用电气公司，即美国通用电气公司（General Electric Company），简称GE。
产地：美国
我司主营各类进口工控产品，已与众多国外知名品牌生产厂商建立合作关系，国外直供，进货快且有保障减少中间环节，配备三十九位工程师为您解决更多问题
优势品牌：本特利 内华达/Bently Nevada、霍尼韦尔/Honeywell、ABB、GE Fanuc/通用电气、YOKGAWA/横河/、EMERSON/艾默生旗下（EPRO、DeltaV、OVATION、Fisher、Rosemount）、FOXBORO/福克斯波罗、HIMA/黑马、SCHNEIDER/施耐德、TRICONEX/康吉森 英维思、ICS TRIPLEX、BACHMANN/巴赫曼、WOODWARD/伍德沃德、PROSOFT/普罗索福特、FUJI/富士、SIEMENS/西门子、Allen Bradley/罗克韦尔AB等等进口品牌
DCS分布式控制系统、PLC可编程控制系统、PES系统、ESD系统冗余容错控制系统、工业机器人工控备件样样齐全
扫一扫咨询微信客服
