CLSR-33-N2CE-1 YASKAWA 测试器 识别并解决现场总线问题

CLSR-33-N2CE-1 YASKAWA 识别并解决现场总线问题

CLSR-33-N2CE-1测试器将信号测试器、存储示波器、协议分析器和主模拟器组合成一个工具。该工具设计用于广泛的应用，从设置和调试、文档、验收测试和优化到预防性维护、故障排除和实验室测试。此外，PROFIBUS测试仪可以在没有笔记本电脑的情况下使用，并且能够以独立模式运行全面的网络测试。

用户只需点击一下鼠标(PC模式)或按一下按钮(独立模式)，就能启动网络的完整网络测试，包括自动信号和协议分析。所有结果的摘要以非常直观的方式显示给用户。在PC模式下，该软件包旨在强调重要的易用性，同时保留网络专家所需的更深入的诊断功能。这使得该工具对于缺乏经验的用户和现场总线专家来说都是理想的。

连接到CLSR-33-N2CE-1会立即自动检测波特率或开路电压。在独立模式下，可以使用实时状态功能测试总线。多可在测试工具中保存10次快速测试和41天内记录的趋势，并在以后导入电脑。PC软件为执行、分析和管理总线测试提供了许多附加功能。拓扑扫描功能确定总电缆长度和从设备之间的电缆长度。测试结果可以记录在详细的测试报告中。

在示波器和帧分析器视图中，专家可以进行深入、详细的分析。对于集成主模拟器的总线和设备测试，只需指定波特率，无需配置或参数化。


CLSR-33-N2CE-1 YASKAWA identifies and resolves fieldbus problems

The CLSR-33-N2CE-1 tester combines a signal tester, storage oscilloscope, protocol analyzer, and master simulator into one tool. The tool is designed for a wide range of applications, from setup and commissioning, documentation, acceptance testing and optimization to preventive maintenance, troubleshooting and laboratory testing. In addition, the PROFIBUS tester can be used without a laptop and is capable of running comprehensive network tests in standalone mode.

With one click of a mouse (PC mode) or one click of a button (standalone mode), users can launch a full network test of the network, including automatic signal and protocol analysis. A summary of all results is displayed to the user in a very intuitive way. In PC mode, the package is designed to emphasize the all-important ease of use while retaining the more in-depth diagnostic capabilities required by network specialists. This makes the tool ideal for both inexperienced users and fieldbus experts.

Connecting to the CLSR-33-N2CE-1 automatically detects the baud rate or open circuit voltage immediately. In standalone mode, the real-time status function test bus can be used. Up to 10 quick tests and trends recorded for 41 days can be saved in the test tool and imported to the computer at a later date. PC software provides many additional capabilities for performing, analyzing, and managing bus tests. The topology scan function determines the total cable length and the cable length between the devices. Test results can be recorded in detailed test reports.

In the oscilloscope and frame analyzer view, experts can perform in-depth, detailed analysis. For bus and device tests that integrate the master emulator, only the baud rate is specified, without configuration or parameterization.